How To Operate With Remote Controller - Daikin MCK75JVM-K Service Manual

Operation Manual

5.10 How to Operate with Remote Controller

How to Operate with Remote Controller
How to operate with remote controller
1
To start operation
ON/OFF
Press "
• Pressing again will stop.
2
To automatically switch the airflow rate
AUTO FAN
Press "
• Automatically adjusts the airflow rate to "
(High) in response to the dirty state of the air.
3
To manually switch the airflow rate
FAN SET
Press "
• Each time it is pressed, the airflow rate switches as shown below allowing you to choose your desired
flow.
LL (Quiet)
• The setting "
• After setting "
slow airflow rate.
4
To clean the air quickly
TURBO
Press "
• A high airflow rate will quickly remove any dirtiness in the air.
• This is convenient to use when cleaning.
5
To remove pollen
ANTI-POLLEN
Press "
• Switching the airflow speed every 5 minutes between "
pollen before they fall on the floor.
21
30
".
".
".
L (Low) M (Standard)
" LL (Quiet) is a very slow airflow rate and is convenient when sleeping.
" LL (Quiet) the power for cleaning the air decreases because of the operation at
".
".
1. ON/OFF button
2. Auto fan button
3. Fan setting button
4. Turbo button
5. Anti-pollen button
6. Humidify ON/OFF button
7. Humidify setting button
8. OFF TIMER button
9. Brightness adjustment button
10. Child proof lock button
" LL (Quiet), " " L (Low), "
H (High)
" M (Standard) and "
SiBE81-909
" M (Standard), " " H
" L (Low) will catch
Humidifying Air Purifier