Care And Cleaning - Daikin MCK75JVM-K Service Manual

Operation Manual

5.13 Care and Cleaning

Care & Cleaning
Front panel cleaning
• Wipe off dirt with a piece of cloth or tissue moistened with water.
• For stubborn dirt, wipe with a cloth moistened with a neutral liquid detergent.
Sensor air inlet cleaning
(Dust, odor, temperature and humidity sensors)
• Using a vacuum cleaner nozzle attachment with a
narrow opening, suck up dust adhering to the air inlets
and sensor holes.
NOTE
• Be careful not to scratch the front of the front panel or damage the projections on the back of it when it is
removed.
The projections on the backside operate as a safety switch that shuts power OFF when the panel
is opened.
If damaged, the unit cannot be started.
Rear of front panel
Be careful not to damage these projections.
27
36
Wipe
Air inlets
Top hole
Projection
CAUTION
• Do not use hard bristle brushes, etc.
Tools of the sort may scratch the front panel.
WARNING
• Do not use petrol, benzene, thinner, scouring powder,
kerosene, alcohol, etc.
Substances of the sort may lead to cracking, electric shock or
ignition.
• Do not wash the unit frame with water.
Contact with water may lead to electric shock, fire or damage.
Unit frame cleaning
Vacuum cleaner
• If dust has accumulated, suck it up
Air inlets
WARNING
• In the rear of the hole at the top of the unit is a safety switch,
therefore do not touch it.
Touching the switch may result in electric shock.
• If the switches are accidentally damaged and the unit cannot
be started as a result, contact the service shop.
Vacuum cleaner
with a vacuum cleaner.
Humidifying Air Purifier
SiBE81-909