Chapter 1: Introduction; Chapter 1 Introduction; Overview; Before You Start - Oki OKILAN 6100E+ User Manual

Section 3 - Chapter 1 - Introduction

Chapter 1: Introduction

Overview

This section contains instructions and information on
how to configure your OkiLAN 6100e+ in the NetWare
environment.
There are two environments in which to configure the
OkiLAN 6100e+:
• Bindery (NetWare 3.x)
• NetWare Directory Services (NDS)-for NetWare
versions 4.1 and later.

Before You Start

• You should be familiar with network administration
as well as the physical setup and operation of your
network.
• Write down the serial number and the Ethernet or
Token-Ring address of your OkiLAN 6100e+. You
will find these numbers on the OkiLAN 6100e+
enclosure.
• Install the OkiLAN 6100e+ hardware and connect
the cabling-see Section I. Instructions for hardware
installation are found in Section I of this manual.
• Install the OkiNet Utility for NetWare-see Section I.
III - 4 OKI OkiLAN 6100e+ User's Guide