Oki OKILAN 6100E+ User Manual page 123

Section 4 - Chapter 5 - Telnet Configuration
Identify Default Gateway IP Address (Option 5)
If your local network is attached to other networks, you
must specify the address of your default gateway.
Whenever packets need to be sent to another network,
the default gateway is used.
The gateway address must follow the format
XXX.XXX.XXX.XXX, where each XXX is a number
between 0 and 255.
When the default gateway is changed, it will remain
undetected until the OkiLAN 6100e+ is reset or is power
cycled.
Note: If you select an invalid default gateway or the
default gateway goes down, the OkiLAN
6100e+ may not be able to communicate with
non-local networks.
Configure Port (Option 6)
After the Configure menu appears, you can access the
following configuration option screens.
Specify Configuration Page Language
This option enables you to select how the OkiLAN
6100e+ configuration pages should be printed: Text
(default), PCL, PostScript, or OFF.
Configure Language Switching
This option asks you to select the language of your
printer. For a description of language switching
options, see pages IV-28 and IV-29.
Configure Printer Type
This option enables you to indicate the printer type to
which the OkiLAN 6100e+ is connected. Printer choices
are:
1. Okidata printer.
2. Custom printer.
OKI OkiLAN 6100e+ User's Guide IV - 45