Okilan 6100E+ Connect For Dlc - Oki OKILAN 6100E+ User Manual

Section 8 - Chapter 1 - OkiLAN 6100e Setup for Windows NT 4.0
Notify When Printed
This feature will provide an alert when your job is
active on the printer. This may be useful if the printer is
especially busy.
Description
An optional field where you may list the location or
other useful information about the printer port.

OkiLAN 6100e+ Connect for DLC

OkiLAN 6100e+ Connect for Data-Link Control (DLC)
provides a direct printing solution for users in
Microsoft Windows NT serverless environments with
the DLC/LLC protocol. Print jobs printed through
OkiLAN 6100e+ Connect are sent directly to the
OkiLAN 6100e+ print server and not routed through
the network server, resulting in a reduction of network
traffic. OkiLAN 6100e+ Connect for DLC can be used
to configure the print server, obtain status from the
print server and printer, and send jobs to the printer.
Note: To obtain a version of OkiLAN 6100e+
Connect for DLC that supports Windows NT,
visit our FTP site (ftp://ftp.extendsys.com/pub/
printserver/utilities/) or contact Technical
Support.
Configure Port
If you have printing problems while using the OkiLAN
6100e+ Connect printing port, you may check the
status of the port by selecting Configure Port under
the Ports tab in the Properties screen.
Notify On Printer Error
This feature will check the printer status prior to
printing the job. If a printer error is detected (e.g.
printer off-line or out of paper) the error description
will be given.
VIII - 6 OKI OkiLAN 6100e+ User's Guide