Oki OKILAN 6100E+ User Manual page 179

Section 5 - Chapter 3 - The OkiNet for VINES Utility
The IP address must follow the format
XXX.XXX.XXX.XXX, where each XXX is a number
from 0 to 255. If you change the IP address, the change
will remain undetected until the OkiLAN 6100e+ is
reset or powered off and on.
Note: If you select an invalid IP address, you may not
be able to access the OkiLAN 6100e+ via TCP/
IP.
Default Gateway
If your local network is attached to other networks, you
can specify the address of your default gateway. This
gateway will be selected whenever messages need to be
sent to another network.
The gateway address must follow the format
XXX.XXX.XXX.XXX, where each XXX is a number
between 0 and 255. If you change the default gateway
address, the change will remain undetected until the
OkiLAN 6100e+ is reset or powered off and on.
Note: If you select an invalid default gateway or the
default gateway goes down, the OkiLAN
6100e+ may not be able to communicate with
non-local networks.
Subnet Mask
If your network environment includes subnets, you will
want to set the subnet mask.
The subnet mask must follow the format
XXX.XXX.XXX.XXX, where each XXX is a number
from 0 to 255.
The default subnet mask is 0.0.0.0. The OkiLAN
6100e+ interprets a subnet mask of 0.0.0.0 or
255.255.255.255 as no subnet mask specified.
If you select an invalid subnet mask, you may not be
able to access the OkiLAN 6100e+ via TCP/IP.
OKI OkiLAN 6100e+ User's Guide V - 21