Section Iv: Tcp/Ip; Chapter 2: Configuring The Okilan 6100E; Running Okinet For Netware; Configuring The Okilan 6100E+ Using Okinet For Netware - Oki OKILAN 6100E+ User Manual

Running OkiNet for NetWare

To run the utility, double-click on the OkiNet icon. The
main OkiNet for NetWare screen will display.
By default, the All Print Servers view is selected and all
print servers attached to the network from which the
OkiNet utility is running are listed.
Configuring the OkiLAN 6100e+
Using OkiNet for NetWare
The following steps outline how to configure an
OkiLAN 6100e+.
1. Select the OkiLAN 6100e+ you wish to configure.
2. Select Configuration from the Print Server menu or
select the Configuration icon on the toolbar.
3. Set the appropriate configuration by choosing the
applicable file folder tabs.
The following settings are configurable based on the
capabilities of the OkiLAN 6100e+:
• NetWare
• NetWare Queues
• NetWare Port
• TCP/IP
• Protocols
OKI OkiLAN 6100e+ User's Guide
Section 3 - Chapter 2 - OkiNet for NetWare
• Output Port
• SNMP
• VINES
• EtherTalk
• SNMP Traps
III - 7