Configuring Tcp/Ip Options - Oki OKILAN 6100E+ User Manual

Configuring TCP/IP Options

To configure options specific to the TCP/IP protocol,
select the TCP/IP tab. The following screen will
display:
Fill in the following information:
IP Address Resolution
• Set Permanent - Select this option to make the IP
address permanent. If the OkiLAN 6100e+ has been
configured to remember its IP address, it does not
need to determine its address each time it is powered
on.
Enter the IP address for the OkiLAN 6100e+. The IP
address must follow the format
XXX.XXX.XXX.XXX, where each XXX is a
number from 0 to 255.
CAUTION: If you select an invalid IP address, you
may not be able to access the OkiLAN 6100e+.
• Use Network Protocol - Select this option to use
RARP, BOOTP or DHCP to determine the IP address
at power up. Specify which protocol(s) to use.
OKI OkiLAN 6100e+ User's Guide
Section 4 - Chapter 4 - OkiNet for TCP/IP
IV - 25