Oki OKILAN 6100E+ User Manual page 98

Section 4 - Chapter 3 - TCP/IP Configuration and Printing
TYPE
ASCII
BINARY Equivalent to "TYPE BINARY".
IMAGE
STRU
MODE
OPEN
CLOSE
QUIT
BYE
With the exception of the OkiLAN 6100e+ 100 series,
OkiLAN 6100e+ print servers will allow one FTP
connection. If more FTP connections are attempted, the
OkiLAN 6100e+ will reject the connection until one of
the other FTP connections is closed. When an FTP
connection is rejected, the FTP program will typically
display a message like the following:
$ ftp<CR>
ftp> open OkiLAN 6100e_name<CR>
connection refused
ftp>
Note: Specifying binary mode is important for all
jobs. Most FTP implementations default to
ASCII mode. This may cause unexpected or
undesired printing results.
IV - 20 OKI OkiLAN 6100e+ User's Guide
Changes the representation type used
for data transfer. Image (or binary) and
ASCII are the only types supported.
Equivalent to "TYPE ASCII".
Equivalent to "TYPE IMAGE".
Specifies file structure. File is the only
structure supported.
Specifies transfer mode. Stream is the
only transfer mode supported.
Opens connection to remote host.
Terminates FTP session.
Terminates FTP session and exits FTP.
Equivalent to QUIT.