Oki OKILAN 6100E+ User Manual page 223

Section 8 - Chapter 1 - OkiLAN 6100e Setup for Windows NT 4.0
5. From the list of Available Printer Ports, select OKI
OkiLAN 6100e+ Connect IP Monitor as the type
of port to add and click New Port.
You will enter into the Add OkiLAN 6100e+ Connect
Port screen where there will be a list of all OkiLAN
6100e+ print servers available on the local subnet.
6. If the port you wish to add is listed in the Ports
available on local subnet: window, select the port
name and click Add.
If the port you wish to use is not listed, click the
Locate non-local device button and enter the Static
IP Address used for the print server. Click the Add
button.
Note: The OkiLAN 6100e+ Connect DHCP
discovery feature will relocate a print server on
the local subnet by its port name, even if the IP
address changes. This feature is enabled on the
local subnet only. A non-local print server will
not be re-discovered if the IP address changes.
7. Click OK.
You will now be able to use OkiLAN 6100e+ Connect
for TCP/IP. Whenever you print to the printer
configured with OkiLAN 6100e+ Connect, your print
job will go directly to the OkiLAN 6100e+ print server
port.
OKI OkiLAN 6100e+ User's Guide VIII - 5