Restoring Factory Default Settings - Oki OKILAN 6100E+ User Manual

Section 4 - Chapter 4 - OkiNet for TCP/IP

Restoring Factory Default Settings

To restore the OkiLAN 6100e+ to factory default
settings, select the OkiLAN 6100e+ from the list of
available print servers. From the Print Server menu bar,
select Reset.
From the Reset Print Server screen, choose one or
more of the following options:
Output Ports
Restores settings related to output ports such as port
name and output type.
TCP/IP
Restores settings specific to the TCP/IP protocol
configuration such as the IP address and subnet mask.
NetWare
Restores settings specific to the NetWare protocol
configuration such as the mode and default file server.
Banyan VINES
Restores settings specific to the VINES protocol
configuration such as user name and print service
names.
EtherTalk
Restores settings specific to the EtherTalk protocol
configuration such as the name and zone.
Once you have chosen the desired options, select
Restore. To completely restore the print server to
factory default settings, select all items in the list.
CAUTION: Make sure there are no active print jobs
when you select Restore Factory Defaults. If you reset
the OkiLAN 6100e+ while a job is printing, the job may
not print successfully.
OKI OkiLAN 6100e+ User's Guide IV - 35