Oki OKILAN 6100E+ User Manual page 125

Section 4 - Chapter 5 - Telnet Configuration
Restore to Factory Default Configuration (Option 9)
This option automatically restores the OkiLAN 6100e+
to its original factory defaults. Be aware that when you
restore the OkiLAN 6100e+ to the original factory
default settings, only the TCP/IP protocol and output
port information is restored and your TCP/IP password
and IP address are erased.
CAUTION: Make sure that no print jobs are active
when you select Restore to Factory Defaults.
Performing this operation will restore parameters for
the TCP/IP protocol to factory defaults. If you reset
the OkiLAN 6100e+ while a job is printing, the job may
not print successfully.
OKI OkiLAN 6100e+ User's Guide IV - 47