Oki OKILAN 6100E+ User Manual page 175

Section 5 - Chapter 3 - The OkiNet for VINES Utility
3. Select Add Service to add a print service. Then,
select the destination port of the OkiLAN 6100e+ to
which the printer is connected.
Once you have configured your print services, you
may need to configure the printer port parameters.
4. Select Port Configuration from the Print Server
Configuration screen. Next, select the port you wish
to configure.
5. After you have selected a port for configuration, a
Configuration screen will appear. This screen asks
for information that is pertinent to the selected port.
Language Switching
Each output port can be selected to perform the
following language switching options: AUTO, PCL,
PS, or OFF. Unless the OFF selection is selected, a
language switching character string will be inserted
before each print job. The Printer Type selection is
used to determine the actual characters required to
switch you printer language.
• OFF - Print data stream will be sent directly to the
output port without alteration.
• PCL - Inserts the appropriate character string in
from of each print job to switch the printer to the
PCL print language.
• PS - Inserts the appropriate character string in from
of each print job to switch the printer to the
PostScript printer language.
• AUTO - Enables the auto language sensing function.
This function examines the print job data stream and
determines the required print languages.
Printer Type
The Printer type selection is used to determine the
actual character string required for your printer. If your
printer type is not listed, select Other. Enter the
required character stings for switching your printer
language into the PCL or PS Sequence fields.
OKI OkiLAN 6100e+ User's Guide V - 17