Oki OKILAN 6100E+ User Manual page 149

Section 4 - Appendix B - Application Considerations
c) Remote printer name - yourqueuename
This is the name of the queue on the OkiLAN
6100e+ and must end with 1, 2, 3 or 4, depending
on the port selected to service the print jobs.
d) Remote cancel model - rcmodel
Used for remote printer job removal.
e) Remote status model - rsmodel
Used for remote printer queue status.
f) Printer class - (optional)
g) Make this the system default printer. Leave box
unchecked.
h) Allow anyone to cancel requests. Check if
desired.
i) Remote printer is on a BSD system. Check this
box.
Tells the HP-UX system that it is communicating
with a Berkeley style remote printer (such as
LPD).
5. Select the OK button. A status window will outline
the tasks performed to install the queue. When you
see the message task completed, select OK.
6. Pull down the Lists menu and select Exit.
7. Select the Exit SAM button.
8. Test printing to the OkiLAN 6100e+ with the
following command:
lp -d lj4 filename
OKI OkiLAN 6100e+ User's Guide IV - 71