Appendix A Troubleshooting; Main Status Indicator; Restoring The Okilan 6100E+ To Factory Defaults - Oki OKILAN 6100E+ User Manual

Section 4 - Appendix A - Troubleshooting
Appendix A
Troubleshooting

Main Status Indicator

Upon power-up, the main status indicator flashes
orange. It changes to green when the OkiLAN 6100e+
passes self-test. The indicator stays orange if the
OkiLAN 6100e+ fails self-test. If the indicator turns
solid orange due to an error, a configuration sheet will
be printed automatically. Check the error message
reported on the configuration sheet.
Restoring the OkiLAN 6100e+ to
Factory Defaults
In most cases, the best way to restore the OkiLAN
6100e+ to factory defaults is via telnet. However, if you
are unable to connect to the device because of a
configuration error, use the following method which
does not require a network connection.
To restore the OkiLAN 6100e+ to factory defaults,
complete the following steps:
1. Power down the OkiLAN 6100e+.
2. While holding in the Print Configuration Sheet
Test button, power up the OkiLAN 6100e+. Hold the
button until the status indicator turns solid green.
3. Power cycle the OkiLAN 6100e+. It will have
restored itself to defaults.
IV - 48 OKI OkiLAN 6100e+ User's Guide