Chapter 3: The Okinet For Vines Utility; Chapter 3 The Okinet For Vines Utility; Overview; Installing The Okinet For Vines Utility - Oki OKILAN 6100E+ User Manual

Section 5 - Chapter 3 - The OkiNet for VINES Utility
Chapter 3
The OkiNet for VINES Utility

Overview

This section contains information about the OkiNet for
VINES utility. OkiNet for VINES is also known as
VPMAN. OkiNet for VINES is provided by OKI to
configure and manage the OkiLAN 6100e+. OkiNet for
VINES supports Banyan VINES versions 5.0 and
higher.
This chapter describes the following:
• Installing the Utility
• Running the OkiNet for VINES Utility
• Changing Configuration Settings
• Resetting the OkiLAN 6100e+
• Restoring Factory Defaults
• Printing a Configuration Sheet
• Viewing Print Status Information
• Enable/Disable Protocols
• Configuring the TCP/IP Protocol

Installing the OkiNet for VINES Utility

Before installing the OkiNet for VINES, you must do
the following:
• Install the OkiLAN 6100e+ hardware and connect
the cabling.
• Write down the serial number and Ethernet address
of the OkiLAN 6100e+.
• Make sure your network is fully operational.
• Create StreetTalk User Name and Print Service(s)
for the OkiLAN 6100e+ (Chapter 2).
• Install OkiNet for VINES - see Section I.
OKI OkiLAN 6100e+ User's Guide V - 13