Resetting To Factory Defaults - Oki ML320 Installation Manual

OkiLAN 6120i
®
Product Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Mise à jour sur le produit . . . . . . . . . . . . . . . . . . . . . . . . 6
Actualización del Producto . . . . . . . . . . . . . . . . . . . . . . . 7
Atualização de produto . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Revised Regulatory Information
Federal Communications Commission (FCC)
FCC General Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
FCC Radio Frequency Interference Statement
WARNING: This equipment has been tested and found to
comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
commercial environment. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct
the interference at their own expense.
Note: It is the responsibility of the user to obtain the required
shielded cable in order to ensure compliance of this
equipment with FCC regulations.
Changes or modifications not expressly approved by Oki Data
may void your authority to operate this device.
Industry Canada (IC) Statements
IC Radio Interference Statement
This Oki Data apparatus complies with the Class A limits for
radio interference as specified in the IC Radio Interference
Regulations.
IC Interference-Causing Equipment Regulations
This Class A digital apparatus complies with Industry Canada
ICES-003.
European Union Council of the
European Communities
Statement of Conformance
This product complies with the requirements of the Council
Directives 89/336/EEC (EMC) and 73/23/EEC (LVD) as amended
where applicable on the approximation of the laws of the member
states relating to electromagnetic compatibility and low voltage.
WARNING! This is a Class A product. In a domestic
environment this product may cause radio interference, in
which case the user may be required to take adequate
measures.
Entering the Printer IP Address
While installing the printer driver for TCP/IP using the CD
supplied with your printer:
when you come to the screen requesting the IP Address for the
printer, you must select "IP Address" (instead of the default
"Search address") and type in the printer's IP Address before
c licking Next. If you need help, please contact your Network
Administrator for the IP Address to use.
LPR
Make sure there are no error conditions in the printer (e.g.,
paper jam) before you use LPR to discover the printer.
TELNET
These network print servers do not support TELNET.

Resetting to Factory Defaults

1. Turn off the printer.
2. Turn on the printer and wait for the print server to boot up
(about 30 seconds).
3. Press and hold the TEST button on the print server for about
15 seconds.
4. Release the TEST button.
The print server resets to the factory default settings and
reboots.
OKI, OkiLAN ® Oki Electric Industry Company, Ltd.;
5: English
6120e_8 CROP.jpg
PACEMARK ® Oki Data Americas, Inc.