Table of Contents
Advertisement
5. Use a small straight-slot screwdriver to break the four prongs of the small compound gear.
6. Remove the small compound gear.
7. Release the large feed roller (B/M) assembly (2) from the four mounting clips and remove the large
feed roller assembly from the mid frame.
8. Spread the right side frame (3) and remove the large feed roll.
NOTE:
Install the new small compound gear after the machine is installed in the base assembly.
P/N 50409601 Assembly: Large Feed Roller B/M
Includes the part listed below.
P/N Gear:
Small Compound
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
RSPL B.2.04
RSPL B.2.04
Advertisement
Table of Contents
