Print Method - Oki JET 2010 Service Manual

Page: 12
Service Guide OJ2010
Chapter 1 Product Specifications

1.6.07 Print Method

Thermal InkJet
InkJet printers work by spraying liquid ink onto the print media.
The inkjet printhead-to-media gap is very small.
A crease or sharp edge on the paper may damage the inkjet head.
Paper dust or other contaminants can clog the inkjet nozzles on the printhead.
Perform the nozzle test to clean the inkjet nozzles. Refer to Section 3.4 for further information. Inkjet
printheads are delicate and easily damaged .
NOTE:
The printhead is part of the print cartridge.
The printhead is replaced when the print cartridge is replaced.
Black Print Cartridge: Average Life (Ink Saver OFF): 1000 pages at 5% coverage
Color Print Cartridge: Average Life (Ink Saver OFF): 200 pages at 15% coverage of seven color graphics.
CAUTION:
Using a non-Okidata ink cartridge may damage the unit and void any warranties.
Always perform the printhead alignment procedure when a print cartridge is replaced. Refer to the Users
Guide or Section 3.3 for further information .
WARNING:
NEVER refill or use refilled print cartridges.
Refilling empty print cartridges with unapproved ink will invalidate the warranty.
Incompatible inks can cause damage to the printhead or printer.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)