3.2.10 Encoder Strip
1. Remove the preliminary items.
2. Remove the front cover.
3. Remove the printhead carrier assembly.
4. Gently release the tension on the encoder strip (1) by flexing the encoder strip tensioner (2) and
remove the encoder strip.
NOTE:
Installation
Make sure that the ends of the strip are centered in the mounting notches.
Make sure that the strip does not bind in the encoder card on the carrier.
P/N 51017901 Strip: Encoder
P/N 58237001 Packet: Accessory Parts
Includes
P/N N/A
Tensioner: Encoder Strip (PP)
P/N N/A
Cuff: Tensioner (PP)
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Chapter 3 Maintenance and Disassembly
. . . . . . . . .
(3.2.01
. . . . . . . . . . . . . . . (3.2.12
(3.2.28
RSPL B.2.07
RSPL B.2.07
RSPL B.2.07
RSPL B.2.07
Service Guide OJ2010
)
)
)
Page: 67