Refer to the Users Guide for details.
When replacing the system board, be sure to remove the EPROM (Code Module) at U56.
Replacement boards are shipped WITHOUT the EPROM.
CAUTION:
When removing the board, you must follow standard electrostatic sensitive device (ESD)
procedures or you may damage the components.
P/N 55078701 Board: System (w/o EPROM)
P/N 58237001 Packet: Accessory Parts
Includes the parts listed below.
P/N N/A Jumper: 2-Pin (PP)
P/N N/A Screw: Ground Jumper Mounting (PP)
P/N N/A Screw: System Board Mounting (PP)
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
RSPL B.2.05
RSPL B.2.05
RSPL B.2.05
RSPL B.2.05
RSPL B.2.05