Table of Contents
Advertisement
3.4.04 Nozzle Test
General Information
The Nozzle Test pinpoints and cleans (purges) any clogged nozzles in the print cartridges.
After the test is complete, a test line prints. Use the test line to determine if the cleaning process was
successful.
Perform the Nozzle Test if either of the following occur.
The nozzles appear to be clogged.
Characters are not printing properly.
The Nozzle Test is also covered in the Users Guide. It may be performed by the end user.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OJ2010
Chapter 3 Maintenance and Disassembly
Page: 98
Advertisement
Table of Contents
