Table of Contents
Advertisement
3.2.19 Maintenance Wipers and Caps
1. Remove the preliminary items.
2. Remove the front cover.
3. Push the carrier to the left, away from the maintenance station.
4. Gently pull the caps and wipers (1) off of their mountings.
NOTE:
Installation
Be sure that each cap is positioned with the locking tabs to the left and right before pushing them
down on their mounting posts.
Be sure that the wipers are completely sealed.
P/N 50220401 Packet: Main. Wiper & Cap Parts RSPL One of each
Chapter 3 Maintenance and Disassembly
(3.2.01
. . . . . . . . .
. . . . . . . . . . . . . . .
(3.2.12
Service Guide OJ2010
)
)
Page: 76
B.2.09
Advertisement
Table of Contents
