3.2.08 Ejectors
1. Remove the preliminary items.
2. Remove the front cover.
3. Unlatch the ejectors (1) from the large feed roll shaft (2) by pushing down on the ejectors where they
grip the large feed roll shaft.
4. Pry the ejectors forward to unlatch them.
5. Remove the ejectors.
P/N 50929601 Arm: Ejector
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Chapter 3 Maintenance and Disassembly
. . . . . . . . .
(3.2.01
. . . . . . . . . . . . . . . (3.2.12
RSPL B.2.04
Service Guide OJ2010
)
)
Page: 65