Table of Contents
Advertisement
2.1.07 Power On Self Test (POST) Sequence
When the printer is powered ON, the Power On Self Test (POST) Sequence occurs.
Correct POST
The correct POST sequence is listed below.
1. The power light comes on.
2. The carrier moves over the maintenance station and seals the printheads.
3. The paper feed gears turn.
4. All motors stop and the power light stays on.
If the unit DOES NOT complete POST, refer to the POST Symptom Table in Section Four of this Service
Handbook and perform the indicated action.
If you are troubleshooting, and the unit completes the POST with no errors, refer to the Symptom Tables,
Section Four of this Service Handbook.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OJ2010
Chapter 2 Principles of Operation
Page: 37
Advertisement
Table of Contents
