Table of Contents
Advertisement
A.1 OVERVIEW
A.1.01 General Information
This section describes the characteristics of the printed circuit boards used in the product.
The areas listed below are covered.
Firmware
Fuses
Jumpers
Switches
Sensors
Test Points
Where an item is not applicable, the word
NOTES:
This appendix provides a brief description of each board.
Troubleshooting information is provided in Section Four of this Service Handbook.
Test procedures are provided in Sections Three and Four of this Service Handbook.
Please refer to Sections Three and Four for details on the adjustment and testing procedures mentioned
in this appendix.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OJ2010
Chapter A Board Diagrams
NONE
will be listed.
Page: 147
Advertisement
Table of Contents
