Table of Contents
Advertisement
3.2.01 Preliminary Items
1. Power OFF the unit.
2. Remove any paper.
3. Detach the AC power cord, if installed.
4. Detach the parallel interface cable, if installed.
NOTE:
The AC power cord IS NOT supplied with the printer. It must be purchased separately.
The parallel interface cable IS NOT supplied with the printer. It must be purchased separately.
The parallel interface cable MUST BE capable of supporting bi-directional communications to
connect
the printer to the computer.
This cable CANNOT BE more than six (6) feet long.
P/N 56612101
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OJ2010
Chapter 3 Maintenance and Disassembly
Cord: Power RSPL B.2.05
Page: 58
Advertisement
Table of Contents
