Table of Contents
Advertisement
1. Remove the preliminary items.
2. Remove the front cover.
3. Remove the rear cover.
4. Remove the base assembly.
5. Disconnect the paper feed motor connector from the system board. Not shown
6. Remove the four screws (1). The screws secure the carrier frame assembly (2) to the left and right
side frames.
7. Remove the carrier frame assembly.
NOTE:
Installation
Be sure that the small feed roll spring extensions (3) are in the grooves of the small feed roll
arms. Be sure that the short extensions of the two paper flap springs are caught under the
carrier frame (4).
P/N 53347601 Frame: Carrier
P/N 58237001 Packet: Accessory Parts
Includes the part listed below.
P/N N/A
Screw: Frame Mounting (PP)
. . . . . . . . .
(3.2.01
. . . . . . . . . . . . . . . (3.2.12
. . . . . . . . . . . . . . .
(3.2.30
. . . . . . . . . . . . (3.2.02
RSPL
RSPL
)
)
)
)
B.2.03
B.2.03
B.2.03
Advertisement
Table of Contents
