Table of Contents
Advertisement
Page: 108
Service Guide OJ2010
Chapter 3 Maintenance and Disassembly
3.7.02 Installation
1. Make sure that the printer is powered ON.
2. Open the printer access cover.
3. Remove the black print cartridge from its packaging.
DO NOT touch the copper-colored area!
Hold the cartridge by its plastic surfaces.
4. Carefully remove the tape covering the printhead on the print cartridge.
Be sure to remove all the tape.
DO NOT touch the copper-colored area!
5. Insert the black print cartridge in the carrier.
The print cartridges must be inserted in the correct position in the carrier.
Match the black print cartridge handle to the black color strip on the carrier.
As you are facing the printer, the black print cartridge is installed in the left-hand position.
Advertisement
Table of Contents
