Table of Contents
Advertisement
4.4.03 START HERE Flowchart
START
Is the Power ON light flashing?
YES
Count the number of flashes between pauses.
Refer to Service Error Indications, Section 4.6 of this Service Handbook
NO
The problem may be an intermittent error or the error indicator lights may have been cleared.
Perform the actions in the listed order.
1. Run the Printer Error Log Recovery.
2. Run the Initialize Error Log to clear the error.
3. Run the Test Page.
4. Run the Power On Self Test (POST) Sequence.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Refer to Section 4.8 of this Service Handbook
Refer to Section 4.8 of this Service Handbook
Service Guide OJ2010
Chapter 4 Failure and Repair Analysis
Refer to Section 4.8 of this Service Handbook
Refer to Section 4.6 of this Service Handbook
Page: 120
.
.
.
.
.
Advertisement
Table of Contents
