Installing A Client - NEC Univerge SV9100 Installation Manual

Installing a Client

A MyCalls client can be installed to allow an individual to use the MyCalls application on their PC.
During the installation you are prompted to enter the name of the MyCalls server PC. Once the
installation has completed then the client will be able to use any of the functions available in the
MyCalls application.
standard client or a client can be deployed using an MSI file. A network client works by installing a
small amount of components on the client PC and then running the MyCalls application from a
network share on the MyCalls server. A standard client will install a lot more components onto the
client PC and the application will be run from the local PC. The MSI installer allows an installation file
to be created, this can be deployed on a client PC.
There are 4 different client applications that can be installed.
When each client is installed, you can choose with of the applications are installed.
! Note: It is not possible to use the Network client and screen pop Outlook.
There are three types of clients that can be installed, a network client, a
This is the MyCalls application typically used for
configuring MyCalls, running reports and viewing real
time information
This is the MyCalls Desktop application.
This is the Operator Console application.
This is the Stop / Start Recording Client.
25 | P a g e