Assembling The Steering Handle; Short Handle; Long Handle - SELVA MARINE Ray 8 Service Manual

STEERING HANDLE

ASSEMBLING THE STEERING HANDLE

(SHORT HANDLE)

1. Install:
Stop switch 1


NOTE:
Install stop switch 1, then pull switch


lead 2 out from the hole in steering
handle 3.
Fit switch lead 2 between steering


handle 3 and stop switch 1 so that there
is no interference with the throttle shaft.
2. Install:
Throttle cables 4


Throttle shaft 5


NOTE:
Pass throttle cable 4 through the hole in


steering handle 3, then connect to
throttle shaft 5.
Install throttle shaft 5 to steering handle


3.
ASSEMBLING THE STEERING HANDLE

(LONG HANDLE )

1. Install:
Stop switch 1


NOTE:
Install stop switch 1, then pull switch


lead 2 out from the hole in steering
handle 3.
Fit switch lead 2 between steering


handle 3 and stop switch 1 so that there
is no interference with the throttle shaft.
2. Install:
Throttle cables 4


Throttle shaft 5


NOTE:
Pass throttle cable 4 through the hole in


steering handle 3, then connect to
throttle shaft 5.
Install throttle shaft 5 to steering handle


3.
7-12