Removing The Flywheel Rotor - SELVA MARINE Ray 8 Service Manual

A
B
A
FLYWHEEL ROTOR
B

REMOVING THE FLYWHEEL ROTOR

1. Remove:
Flywheel rotor nut


Flywheel holder:
YB-06139/90890-06522
A
For USA and Canada
B
Except for USA and Canada
NOTE:
The major load should be applied in the
direction of the arrows. If the load is not
applied as shown, the flywheel holder may
easily slip off of the flywheel rotor.
2. Remove:
Flywheel rotor


Universal puller:
YB-06117/90890-06521
A
For USA and Canada
B
Except for USA and Canada
CAUTION:
Keep the nut side flush with the


crankshaft end until the flywheel rotor
comes off the tapered portion of the
crankshaft.
To prevent damage to the engine or


tools, screw in the universal puller bolts
evenly and completely so that the
universal puller plate is parallel to the
flywheel rotor.
5-10