Disassembly And Assembly; Non-Reusable Items - SELVA MARINE Ray 8 Service Manual

GEN
INFO
SAFETY WHILE WORKING

3. Non-reusable items

Always use new gaskets, packings, O-
rings, split-pins and circlips, etc., on
reassembly.

DISASSEMBLY AND ASSEMBLY

1. Clean parts with compressed air when
disassembling.
2. Oil the contact surfaces of moving parts
before assembly.
3. After assembly, check that moving parts
operate normally.
4. Install bearings with the manufacturer's
markings on the side exposed to view,
and liberally oil the bearings.
cC
Do not use compressed air to spin the bear-
ings dry. This causes damage to the bear-
ing surfaces.
5. When installing oil seals, apply a light
coating of water-resistant grease to the
outside diameter.
1-4
E