Removing The Control Cable, Hose And Wire Lead - Yamaha F50D Servise Manual

POWR
Removing the control cable, hose
and wire lead
1. Remove the bolts 1 and retaining plate 2.
2
2. Remove the throttle cable 3 and shift
cable (rod) 4.
å
4
∫
4
å R model
∫ H model
7-9
Power unit
1
3
3
3. Disconnect the fuel hose 5.
5
4. Remove the plastic tie 6, corrugate tube
7, fuse holder 8, and then disconnect
the battery cables 9, PTT relay lead
(PTT model), and 10-pin main wiring har-
ness coupler a.
9
a
5. Disconnect PTT motor leads b and c
(PTT model), and ground leads d.
b
6. Disconnect the gauge coupler e (R
model) or alert indicator coupler (H
model).
9
6
7
8
c
d