Assembling The Propeller Shaft Assembly - Yamaha F50D Servise Manual

LOWR
Bearing inner race attachment 9:
90890-06639
TIP:
Install the ball bearing with the manufacture
identification mark e facing toward the pro-
peller shaft housing (propeller side).
4. Install the reverse gear assembly into the
propeller shaft housing.
Needle bearing attachment 0:
90890-06607
5. After installing the reverse gear assem-
bly, check that the reverse gear rotates
smoothly.
6. Install a new O-ring q.
Assembling the propeller shaft
assembly
1. Install the dog clutch 1 with the "F" mark
a facing toward the forward gear onto
the propeller shaft 2.
8-9
Lower unit
0
q
TIP:
Align the hole b in the dog clutch 1 with the
hole c in the propeller shaft 2.
2. Install the spring 3 and slider 4 into the
propeller shaft 2.
a
4
3. Install the cross pin 5 and spring 6.
6
5
TIP:
Align the hole in the dog clutch with the hole
d in the slider, when installing the cross pin.
4. Check that the dog clutch operates
smoothly.
c
b
2
1
3
d