Installing The Starter Motor; Charging Unit And Components; Checking The Lighting Coil - Yamaha F50D Servise Manual

8
6
7
5
4
9
A
8
7
b
2
TIP:
Install the stator so that the label a is read
9
from top to bottom.
Align the mark b on the stator with mark
9
on the bracket 2.
Install the cover 8 in the direction shown.
9
3. Install the pinion 0, spring, and pinion
stopper q.
4. Slide the pinion stopper down, and then
install clips w.
Starter motor / Charging unit and components
a
9
8
A
w
q

Installing the starter motor

1. Install the starter motor to the power unit.
See "Starter motor" (7-15).

Charging unit and components

Checking the lighting coil

1. Disconnect the lighting coil coupler a,
and then connect the test harness 1 to
the lighting coil coupler.
Test harness (3 pins) 1: 90890-06870
2. Measure the lighting coil output peak
voltage. Replace the stator assembly if
below specification.
a
G G
G
a
1
R
W
B
w
0
0
1
2
3
4
5
6
7
8
9
10
A
5-28