Draive shaft runout: 0.2 mm (0.008 in)
Checking the lower case
1. Check the skeg, anti-cavitation plate and
torpedo. Replace the lower case if
cracked or damaged.
Assembling the forward gear
1. Install a new taper roller bearing into the
forward gear. NOTICE: Do not reuse the
bearing, always replace it with a new
one.
Magnet base plate 1: 90890-07003
Bearing inner race attachment 2:
90890-06639
Assembling the drive shaft
1. Install a new taper roller bearing into the
drive shaft. NOTICE: Do not reuse the
bearing, always replace it with a new
one.
Installing the shift rod
1. Install new O-rings 1, 2, plate 3, a new
1
2
Assembling the lower case
9
9
9
Drive shaft and lower case (F50D)
1
Bearing inner race attachment 1:
90890-06644
oil seal 4, circlip 5, shift rod 6, and
shift cam 7.
1
4
3
5
2
F
Use heat-resistant gloves, otherwise
burns could result.
Remove any flammable substances,
such as gasoline and oil, around the
working area to avoid the risk of fire.
Heat the lower case in a well-ventilated
area.
1
6
7
8-14
0
1
2
3
4
5
6
7
8
9
10
A