Usata Ssd Indicator Codes - Dell E28S Series Owner's Manual

Dell PowerEdge R430 system overview
Figure 9 Hard drive indicators (continued)
3. hard drive
The Hard drive indicator codes table describes the indicator codes: flashing green, steady green,
and amber.
Table 9 Hard drive indicator codes
Drive-status indicator pattern (RAID
only)
Flashes green twice per second
Off
Flashes green, amber, and then turns off
Flashes amber four times per second
Flashes green slowly
Steady green
Flashes green for three seconds, amber
for three seconds, and then turns off after
six seconds

uSATA SSD indicator codes

Figure 10 uSATA SSD indicators
1. uSATA SSD activity indicator
2. uSATA SSD status indicator
3. uSATA SSD
Dell PowerEdge R430 Owner's Manual
28
Note: If the hard drive is in the Advanced Host Controller Interface (AHCI) mode, the status
indicator (on the right side) does not turn on.
Note: If the SSD is in the Advanced Host Controller Interface (AHCI) mode, the status
indicator (on the right side) does not function and remains off.
Condition
Identifying drive or preparing for removal.
Drive ready for insertion or removal.
Note: The drive status indicator remains off
until all hard drives are initialized after the
system is turned on. Drives are not ready for
insertion or removal during this time.
Predicted drive failure
Drive failed
Drive rebuilding
Drive online
Rebuild stopped