Setting The Operation Mode For Files And Folders - HP 10500 Series Configuration Manual

Setting the operation mode for files and folders

The device supports the following file and folder operation modes:
• alert—The system prompts for confirmation when your operation might cause problems such as file
corruption and data loss. This mode provides an opportunity to cancel a disruptive operation.
quiet—The system does not prompt for confirmation.
•
To set the operation mode for files and folders:
Step
1. Enter system view.
2. Set the operation mode for
files and folders.
Command
system-view
file prompt { alert | quiet }
96
Remarks
N/A
The default mode is alert.