Removing a directory
To remove a directory, you must delete all files and subdirectories in this directory. To delete a file, use the
delete command. To delete a subdirectory, use the rmdir command.
Removing a directory permanently deletes all its files in the recycle bin, if any.
Perform this task in user view.
Task
Remove a directory.
Managing storage media
Before you repair or format a USB disk, make sure the disk is not write protected.
Repairing a storage medium
If part of a storage medium is inaccessible, use the fixdisk command to examine and repair the medium.
Before repairing a storage medium, make sure no other users are accessing the medium. Otherwise, the
repair operation fails.
Perform this task in user view.
Task
Repair a storage medium.
Formatting a storage medium
CAUTION:
After a storage medium is formatted, all files and directories on it are erased and cannot be restored.
Perform this task in user view.
Task
Format a storage medium.
Setting the operation mode for files and folders
The device supports the following file and folder operation modes:
alert—The system prompts for confirmation when your operation might cause problems such as file
•
corruption and data loss. Using the alert mode gives you an opportunity to cancel a disruptive
operation.
•
quiet—The system does not prompt for confirmation.
Command
rmdir directory
Command
fixdisk medium-name
Command
format medium-name
79