Connectors And Pin Assignments; Rj-45 (10Base-T/100Base-Tx) Port Connectors; Figure 84 Rj-45 (8-Pin Modular) Port Connector - Nortel 1000ASE-XD Using Manual

Appendix D

Connectors and pin assignments

This appendix describes the BayStack 420 Switch port connectors and pin
assignments.

RJ-45 (10BASE-T/100BASE-TX) port connectors

The RJ-45 port connectors
end stations without using crossover cables. (See
page 196
Category 3 (or higher) UTP cable. For 100BASE-TX connections, use only
Category 5 UTP cable.

Figure 84 RJ-45 (8-pin modular) port connector

1
for information about MDI-X ports.) For 10BASE-T connections, use
8
616EA
(Figure 84) are wired as MDI-X ports to connect
Using the BayStack 420 10/100/1000 Switch
"MDI and MDI-X devices" on
195