Mac Address Security Port Configuration Screen - Nortel 1000ASE-XD Using Manual

Table 16 MAC Address Security Configuration screen fields (continued)
Field
Clear by Ports
Learn by Ports
Current Learning Mode

MAC Address Security Port Configuration screen

The MAC Address Security Port Configuration screens
allow you to set or modify your MAC address port security configuration on a per
port basis.
To open the MAC Address Security Port Configuration screen:
Description
This field clears the specified port (or ports) that are listed in the Allowed
Source Port(s) field of the MAC Address Security Table screen (see
Address Security Table screens" on page
ports) to be cleared using this field, the specific port (or ports) will be cleared
for each of the entries listed in the MAC Address Security Table. If you totally
clear the allowed Source Port(s) field (leaving a blank field) for an entry, the
associated MAC address for that entry is also cleared.
Default
Range
All source MAC addresses of any packets received on the specified port (or
ports) are added to the MAC Security Table when the Current Learning Mode
field is set to Learning in Progress. You cannot include any of the port values
you have chosen for the secure ports field.
Default
Range
Indicates the current learning mode for the switch ports. When this field is set
to Learning in Progress, all source MAC addresses of any packets received
on the specified port (or ports) are added to the MAC Security Table
(maximum of 448 MAC address entries allowed). If you exceed the limit of
448 entries, the system prompts you with an alert message.
Default
Range
Choose MAC Address Security Port Configuration from the MAC Address
Security Configuration Menu.
Chapter 3 Using the console interface
NONE
NONE, ALL, a port number list (for example, 1/1, 2/6, etc.)
NONE
NONE, ALL, a port number list (for example, 1/1-4, 2/6, etc.)
Disabled
Disabled, Enabled
Using the BayStack 420 10/100/1000 Switch
118). When you specify a port (or
(Figure 48 and
111
"MAC
Figure 49)