Default Settings; Table 56 Factory Default Settings - Nortel 1000ASE-XD Using Manual

Appendix E

Default settings

Table 56
to the console interface (CI) screens and fields for the settings.

Table 56 Factory default settings

Field
BootP Request Mode
In-Band Stack IP Address
In-Band Switch IP Address
In-Band Subnet Mask
Default Gateway
Read-Only Community String
Read-Write Community String
Trap IP Address
Community String
Authentication Trap
Link Up/Down Trap
sysContact
sysName
sysLocation
lists the factory default settings for the BayStack 420 Switch according
Default setting
BootP Disabled
0.0.0.0
(no IP address assigned)
0.0.0.0
(no IP address assigned)
0.0.0.0
(no subnet mask assigned)
0.0.0.0
(no IP address assigned)
public
private
0.0.0.0
(no IP address assigned)
Zero-length string
Enabled
Enabled
Zero-length string
Zero-length string
Zero-length string
Appears in this CI screen
"IP Configuration/Setup screen" on
page 94
"SNMP Configuration screen" on
page 99
"System Characteristics screen" on
page 100
Using the BayStack 420 10/100/1000 Switch
201