Rj-45 Connector Pin Assignments - Nortel 4500 Series Installation Manual

Step
1
2
3
4
5

RJ-45 connector pin assignments

The following section describes the connector pin assignments for the RJ-45
connectors in the Nortel Ethernet Routing Switch 4500 Series switches.
Copyright © 2007, Nortel Networks
.
Action
Disconnect the network fiber cable from the transceiver.
Use the locking/extractor mechanism on the transceiver to release
it. The locking/extractor mechanism varies from model to model as
illustrated in "Transceiver locking/extractor mechanism examples"
(page 25).
Transceiver locking/extractor mechanism examples
Slide the transceiver from the module slot.
If the transceiver does not slide easily from the module slot, use a
gentle side-to-side rocking motion while firmly pulling the transceiver
from the slot.
Attach a dust cover over the fiber optic bores and store the
transceiver in a safe place until you need it.
Note: Discard transceivers in accordance with the proper laws
and regulations.
Nortel Ethernet Routing Switch 4500 Series
Installation Guide
NN47205-300 02.01 Standard
5.0 23 February 2007
RJ-45 connector pin assignments 25
—End—
Nortel Networks Confidential