Figure 62 Multilink Trunk Configuration Screen; Table 27 Multilink Trunk Configuration Screen Fields - Nortel 1000ASE-XD Using Manual

136 Chapter 3 Using the console interface

Figure 62 MultiLink Trunk Configuration screen

Table 27

Table 27 MultiLink Trunk Configuration screen fields

Field Description
Trunk Column header for the read-only fields in this screen. The read-only data displayed in
the Trunk column indicates the trunk (1 to 6) that corresponds to the switch ports
specified in the user-configurable Trunk Members fields.
Trunk Members The Trunk Members column contains fields in each row that can be configured to create
(Unit/Port) the corresponding trunk. The Unit value in the (Unit/Port) field is configurable only when
the switch (unit) is part of a stack configuration. It indicates that the trunk members in
this row are associated with the specified unit number configured in the Unit field. Each
switch port can only be a member of a single trunk. The appropriate trunk number for
each trunk member configured within this field is shown adjacent to the corresponding
switch port in the following screens: Port Configuration screen, and Spanning Tree
Configuration screen.
Default Value
Range
209418-A
describes the MultiLink Trunk Configuration screen fields.
blank field
1 to 8 or 1 to 28 (depending on model type)