Vlan Display By Port Screen - Nortel 1000ASE-XD Using Manual

Table 22 VLAN Port Configuration screen fields (continued)
Field
PVID
Tagging
Auto PVID

VLAN Display by Port screen

The VLAN Display by Port screen
characteristics associated with a specified switch port.
Choose VLAN Display by Port (or press d) from the VLAN Configuration Menu
screen to open the VLAN Display by Port screen.
Description
Associates this port with a specific VLAN. For example, a port with a
PVID of 3 assigns all untagged frames received on this port to VLAN 3.
Default 1
Range 1 to 4094
Allows you to assign VLAN Port Membership tagging options to this port,
as follows:
• Untagged Access: Any VLAN that this port is a member of will not be
802.1Q tagged.
Default Untagged Access
Range Untagged Access, Tagged Trunk
Specifies the port VLAN identifier (PVID) automatically
(Figure
Chapter 3 Using the console interface
57) allows you to view VLAN
Using the BayStack 420 10/100/1000 Switch
127