Figure 59 Port Configuration Screen (2 Of 2); Table 24 Port Configuration Screen Fields - Nortel 1000ASE-XD Using Manual

130 Chapter 3 Using the console interface

Figure 59 Port Configuration screen (2 of 2)

Table 24

Table 24 Port Configuration screen fields

Field
Port
Trunk
Status
Link
209418-A
describes the Port Configuration screen fields.
Description
Indicates the switch port numbers that correspond to the field values in that row of
the screen (for example, the field values in row 2 apply to switch port 2). The values
that you set in the Switch row will affect all switch ports and, when the switch is part
of a stack, the values that you set in the Stack row will affect all ports in the entire
stack (except the GBIC ports or fiber optic ports).
The read-only data displayed in this column indicates the trunks that correspond to
the switch ports specified in the Trunk Members fields of the Trunk Configuration
screen (see "MultiLink Trunk Configuration Menu screen" on page
Allows you to disable any of the switch ports. You can also use this field to control
access to any switch port.
Default Value Enabled
Range Enabled, Disabled
A read-only field that indicates the current link state of the corresponding port, as
follows:
• Up: The port is connected and operational.
• Down: The port is not connected or is not operational.
133).