Mac Address Security Configuration Menu Screen; Figure 46 Mac Address Security Configuration Menu Screen - Nortel 1000ASE-XD Using Manual

MAC Address Security Configuration Menu screen

The MAC Address Security Configuration Menu screen
specify a range of system responses to unauthorized network access to your
switch. The system response can range from sending a trap to disabling the port.
The network access control is based on the MAC addresses of the authorized
stations. You can specify a list of up to 448 MAC addresses that are authorized to
access the switch. You can also specify the ports that each MAC address is
allowed to access. The options for allowed port access include: NONE, ALL, and
single or multiple ports that are specified in a list, for example, 1-4, 6, 9, etc. You
must also include the MAC address of any router connected to any secure ports.
When the switch software detects a security violation, the response can be to send
a trap, turn on destination address (DA) filtering, disable the specific port, or any
combination of these three options.
To open the MAC Address Security Configuration screen:

Figure 46 MAC Address Security Configuration Menu screen

Choose MAC Address Security Configuration from the Switch
Configuration Menu.
Chapter 3 Using the console interface
(Figure
Using the BayStack 420 10/100/1000 Switch
107
46) allows you to