Vlan Workgroup Summary; Figure 25 Vlan Port Configuration Screen Example - Nortel 1000ASE-XD Using Manual

68 Chapter 2 Network configuration

Figure 25 VLAN Port Configuration screen example

VLAN workgroup summary

This section summarizes the VLAN workgroup examples discussed in the
previous sections of this chapter.
As shown in
multiple VLANs:
• Ports 1, 6, 11, and 12 are in VLAN 1.
• Ports 2, 3, 4, 7, and 10 are in VLAN 2.
• Port 8 is in VLAN 3.
Because S4 does not support 802.1Q tagging, a single switch port on each switch
must be used for each VLAN (see
switches" on page
The connection to S2 requires only one link between the switches because S1 and
S2 are both BayStack 420 switches that support 802.1Q tagging (see
spanning multiple 802.1Q tagged switches" on page
209418-A
Figure 26, Switch S1 (BayStack 420 Switch) is configured with
61).
"VLANS spanning multiple untagged
60).
"VLANs